HVLP PAINT SPRAYERS
PLASMA CUTTERS
INFLATION EQUIPMENT
AIRBRUSHES
COMPRESSORS
INFLATABLE BOATS
TENTS & CAMPING
PET DRYERS
HOT DEALS
CONTACT US
HOME

 




PARTS

For accuspray systems click here      

3M/AccuSpray Paint Guns

The Difference is the gun and the reason is basic. 3M™AccuSpray Guns were designed from the inside out for HVLP. Unlike other HVLP guns, ours is designed from the inside out for low pressure performance. The key is the gun's large sweeping air passages which eliminate air turbulence. Full turbine pressure is efficiently delivered without pressure loss. The result is complete atomization whether spraying waterborne or solvent-borne paints, coatings and finishes.

By comparison, most other HVLP guns are simply converted high pressure guns. They have drilled air passages with many restrictions and tight air passages. These sharp turns cause air turbulence, and hurt performance by limiting atomization.

 

For Accuspray parts see below or click here

 

NOTE: Effective July 1st, 3M/Accuspray instituted a price increase on all products and a new ordering system for distributors. Some parts may no longer be available but are shown below until stock runs out.

 

ACCUSPRAY PARTS

Call or email to order

METRIC CONVERSION CHART

.021

.028 .036 .043 .051 .061 .072 .084 .110
0.5mm 0.7mm 0.9mm 1.1mm 1.3mm 1.5mm 1.8mm 2.0mm 3.0mm

 

ITEM PART#

 

DESCRIPTION

PRICE

   

NEEDLE/NOZZLE/AIR CAP KITS

 
PROKIT 10 .036 (.9MM) NOZZLE/NEEDLE, #8 AIR CAP (DELRIN) 80.80
PROKIT 10A .036 (.9MM) NOZZLE/NEEDLE, #8 AIR CAP (ALUMINUM) 98.35
PROKIT 11 .043 (1.1MM) NOZZLE/NEEDLE, #9 AIR CAP (DELRIN) 80.80
PROKIT 11A .043 (1.1MM) NOZZLE/NEEDLE, #9 AIR CAP (ALUMINUM) 98.35
PROKIT 12 .051 (1.3MM) NOZZLE/NEEDLE, #10 AIR CAP (DELRIN) 80.80
PROKIT 12A .051 (1.3MM) NOZZLE/NEEDLE, #10 AIR CAP (ALUMINUM) 98.35
PROKIT 13 .061 (1.5MM) NOZZLE/NEEDLE, #10 AIR CAP (DELRIN) 80.80
PROKIT 13A .061 (1.5MM) NOZZLE/NEEDLE, #10 AIR CAP (ALUMINUM) 98.35
PROKIT 14 .072 (1.8MM) NOZZLE/NEEDLE, #11 AIR CAP (DELRIN) 80.80
PROKIT 14A .072 (1.8MM) NOZZLE/NEEDLE, #11 AIR CAP (ALUMINUM) 98.35
PROKIT 30 .036, .043, .061 NN, #8 & #9 AIR CAP (DELRIN) 215.30
91-501 .021 (0.5MM) NOZZLE/NEEDLE, #4 ALUM AIR CAP 124.55
91-502 .028 (0.7MM) NOZZLE/NEEDLE, #5 ALUM AIR CAP 124.55
91-503 .036 (0.9MM) NOZZLE/NEEDLE, #6 ALUM AIR CAP 124.55
91-504 .043 (1.1MM) NOZZLE/NEEDLE, #7 ALUM AIR CAP 124.55
91-505 .051 (1.3MM) NOZZLE/NEEDLE, #8 ALUM AIR CAP 124.55
91-506 .061 (1.5MM) NOZZLE/NEEDLE, #9 ALUM AIR CAP 124.55
91-507 .072 (1.8MM) NOZZLE/NEEDLE, #10 ALUM AIR CAP 124.55
91-508 .084 (2.0MM) NOZZLE/NEEDLE, #11 ALUM AIR CAP 124.55
91-509 .110 (3.0MM) NOZZLE/NEEDLE, #12 ALUM AIR CAP 124.55
91-510 0.9MM & 1.8MM NOZZLE/NEEDLE, #6 & #10 AIR CAP 215.27
91-511 0.9MM & 1.3MM NOZZLE/NEEDLE, #6 & #8 AIR CAP 215.27
I KIT-04 (ISSAC) .061 (1.5MM) NOZZLE/NEEDLE, #705 ALUM AIR CAP 100.95
I KIT-10 (ISSAC) .072 (1.8MM) NOZZLE/NEEDLE, #707 ALUM AIR CAP 100.95
I KIT-15 (ISSAC) .084 (2.0MM) NOZZLE/NEEDLE, #707 ALUM AIR CAP 100.95
PROKIT 35 19C .043 NOZZLE & NEEDLE, #805 AIR CAP (ALUMINUM 19c only) 135.80
PROKIT 37 19C .061 NOZZLE & NEEDLE, #807 AIR CAP (ALUMINUM 19c only) 135.80
PROKIT 36 19C .072 NOZZLE & NEEDLE, #809 AIR CAP (ALUMINUM 19c only) 135.80
   

AIR CAPS

 
91-009-8 DELRIN AIR CAP #8 51.22
91-009-9 DELRIN AIR CAP #9 51.22
91-009-10 DELRIN AIR CAP #10 51.22
91-009-11 DELRIN AIR CAP #11 51.22
91-043 DELRIN AIR CAP RETAINING RING 13.03
91-120 ALUMINUM AIR CAP RETAINING RING 28.60
91-071-4 ALUMINUM AIR CAP #4 74.53
91-071-5 ALUMINUM AIR CAP #5 74.53
91-071-6 ALUMINUM AIR CAP #6 74.53
91-071-7 ALUMINUM AIR CAP #7 74.53
91-071-8 ALUMINUM AIR CAP #8 74.53
91-071-9 ALUMINUM AIR CAP #9 74.53
91-071-10 ALUMINUM AIR CAP #10 74.53
91-071-11 ALUMINUM AIR CAP #11 74.53
98-020-805 19C LOW CFM ALUMINUM AIR CAP #805 81.22
98-020-807 19C LOW CFM ALUMINUM AIR CAP #807 81.22
98-020-809 19C LOW CFM ALUMINUM AIR CAP #809 81.22
97-009-705 07&10G GRAVITY ALUMINUM AIR CAP #705 76.67
97-009-706 07&10G GRAVITY ALUMINUM AIR CAP #706 76.67
97-009-707 07&10G GRAVITY ALUMINUM AIR CAP #707 76.67
97-009-708 07&10G GRAVITY ALUMINUM AIR CAP #708 76.67
   

NEEDLES/NOZZLES

 
91-107-021/4 .021 DELRIN TIP - 4 PACK 44.45
91-107-028/4 .028 DELRIN TIP - 4 PACK 44.45
91-107-036/4 .036 DELRIN TIP - 4 PACK 44.45
91-107-043/4 .043 DELRIN TIP - 4 PACK 44.45
91-107-051/4 .051 DELRIN TIP - 4 PACK 44.45
91-107-061/4 .061 DELRIN TIP - 4 PACK 44.45
91-107-072/4 .072 DELRIN TIP - 4 PACK 44.45
91-107-084/4 .084 DELRIN TIP - 4 PACK 44.45
91-107-110/4 .110 DELRIN TIP - 4 PACK 44.45
91-143-021DT .021 DELRIN TIP AND S/S NOZZLE SET 66.22
91-143-028DT .028 DELRIN TIP AND S/S NOZZLE SET 66.22
91-143-036DT .036 DELRIN TIP AND S/S NOZZLE SET 66.22
91-143-043DT .043 DELRIN TIP AND S/S NOZZLE SET 66.22
91-143-051DT .051 DELRIN TIP AND S/S NOZZLE SET 66.22
91-143-061DT .061 DELRIN TIP AND S/S NOZZLE SET 66.22
91-143-072DT .072 DELRIN TIP AND S/S NOZZLE SET 66.22
91-143-084DT .084 DELRIN TIP AND S/S NOZZLE SET 66.22
91-143-110DT .0110 DELRIN TIP AND S/S NOZZLE SET 66.22
91-078 NEEDLE SHAFT FOR 10 GUN (DELRIN TIPS) 37.68
98-009 NEEDLE SHAFT FOR 19 GUN (DELRIN TIPS) 37.68
   

CUPS AND CUP PARTS

 
41-11 8 OZ CUP ASSEMBLY 46.67
94-232 8 OZ STORAGE CUP 20.25
94-231 8 OZ STORAGE CUP CAP 13.65
94-084-4 CUP GASKETS 8 OZ CUP - 4 PACK 7.22
42-437 2 QT POT W REGS AND 6' HOSES (TURBINE SETUP) 316.57
41-22 1 QT CUP ASSEMBLY 81.95
41-32 1 QT CUP ASSEMBLY W/ STAINLESS FLUID TUBE 126.07
41-42 PREMIUM 1 QT CUP (3 PC) ASSEMBLY 100.70
94-234 1 QT STORAGE CUP W/ CAP 70.22
94-233 1 QT CUP STORAGE CAP 26.47
94-034-4 CUP GASKETS 1 QT. - 4 PACK 9.87
94-021/3 CUP LID DIAPHRAGM - 3 PACK 9.12
94-064/3 SPRING CLIPS FOR DIAPHRAGM LID - 3 PACK 6.52
97-247 200ML GRAVITY CUP  W/SCREW LID 48.12
97-257 600ML GRAVITY CUP W/ SCREW LID 75.67
97-258 1000ML GRAVITY CUP W/ SCREW LID 89.97
94-122 GASKET - 2 QT. CUP 3.48
94-601 SERVICEABLE CHECK VALVE - METAL 15.88
94-049/3 PLASTIC CHECK VALVE - 3 PACK 15.97
LFG 465 AIR PRESSURE STEM 7.65
   

REBUILD/MAINTENANCE KITS

 
91-145 GUN WRENCH FOR COMPOSITE GUNS 7.65
97-047 GUN WRENCH FOR METAL BODY GUNS 14.37
91-028 REBUILD KIT #10, #11, #14, #15 GUN 47.48
91-028G   REBUILD KIT #10G GUN 47.48
91-029   REBUILD KIT #11 GUN 37.68
97-049   REBUILD KIT ISAAC 07, 07HSP GUNS 55.72
91-270-1 COMPLETE PARTS/CARE KIT #12S GUN 105.40
98-049 REBUILD KIT FOR 19, 19C GUN 55.72
UH-800/10 SHORT SCREWS - 6-32 X 1/2 FOR #10 GUN 10 PACK 1.55
UH-801/10 LONG SCREWS - 6-32 X 5/8" FOR #10 GUN 10 PACK 1.80
   

TURBINE FILTERS

 
92-254 REPLACEMENT FILTER PKG FOR 23 SERIES 37.68
92-255 REPLACEMENT TURBINE FILTER PKG. (230 SERIES) 61.67
92-301 REPLACEMENT TURBINE FILTER PKG. (240 SERIES) 69.20
92-171 FILTER PKG FOR 22sp TURBINES 21.27
92-172 REPLACEMENT TURBINE FILTER PACKAGE 24, 240c 57.17
92-418 REPLACEMENT FILTER PKG FOR TNR SERIES (ALL) 51.60
92-007 AIR INTAKE FILTER 23 SERIES 17.90
92-156 TURBINE MOTOR AIR FILTER 24 SERIES 6.35
92-157 COMPRESSOR MOTOR AIR FILTER 24 SERIES 5.20
   

REGULATORS/HOSES

 
36-00 MINI-REGULATOR (CONVERTS #10 GUN TO COMPRESSED AIR) 82.55
93-103 MINI HIGH PRESSURE REGULATOR 81.68
92-137 PRESSURE RELIEF VALVE (TO CONVERT BLEEDER TURBINES) 37.55
604015015 15' AIR HOSE W/ WHIP (FOR 240C REMOTE POT) 105.00
611344015 15' BLACK FLUID HOSE (FOR 240C REMOTE POT) 52.00
60-4018003 3' BLUE WHIP HOSE W/ QD AND SHUT OFF 54.25
60-4018006 6' BLUE WHIP HOSE W/ QD AND SHUT OFF 75.90
60-4115025   REPLACEMENT TURBINE HOSE 25" - (NO WHIP) 101.62
MC-397 AIR CONTROL VALVE 18.42

 

ACCUSPRAY MANUALS

Use these manuals for general operating information. They also contain exploded parts diagrams and part numbers for ordering.

GUN MANUALS

Accuspray 07 Series
Accuspray 10 and 11 Series
Accuspray 10g Series
Accuspray 12s Series
Accuspray 19 Series
Accuspray 19c Series
Performax Series

TURBINE MANUALS

Accuspray 22sp Series
Accuspray 23K Series
Accuspray 230K and 240K Series
Accuspray 240c Series
Accuspray 2030, 2040 & 2045 TNR Series
 

OTHER MANUALS

Accuspray Cups
Accuspray Nautilus Pumps
 

EXPLODED PARTS DIAGRAMS

Accuspray 07 Series
Accuspray 10 Series
Accuspray 11 Series
Accuspray 10g Series
Accuspray 12s Series
Accuspray 19 Series
Accuspray 19c Series
Performax 05-100 Series
Performax 05-300 Series

 

For a complete listing of general accessories for spray finishing click here.

BACK TO TOP

 Copyright © 2000-2008 Homestead Finishing Products  All rights reserved.

 

 

CONTROL SPRAY

Save time, save money

Great for painting, sealing and Tough jobs are now easy staining hundreds of indoor and Low overspray outdoor projects: Accurate to 1/2" 

MORE INFO....


This is an incredible new HVLP technolgy that requires NO compressor or blower... its built in to the gun!!!!!

• Decks
• Furniture
• Gutters
• Doors
• Fences
• Grills
• Cabinets
• Crafts
• Toys
• Boats
And many more! Full, one coat coverage up to 10" wide Change colors instantly Fast, easy cleanup Professional looking finish Paint Fast - Paint Smart



This gun is set up for use with HVLP (The gun below is for use with air compressors)
SPECIAL $205
REGULAR $295

Wagner NB (non bleeder)
For HVLP Only

The Wagner NB HVLP gun is a favorite with professionals who are looking for the best quality and tecnology at the very best price.
This is a non-bleeder gun, which means that it does not blast air when it is not being triggered, reducing noise and dust contamination of work area. (Bleeder guns have a constant discharge of air.) The non-bleeder is considered a "double action" gun, meaning that you can pull the trigger half-way for air only and the rest of the way for both air and paint or other medium. This is a very desirable feature in HVLP finishing where more control is needed.

HOSES

 
This gun will allow you to use your air compressor as an HVLP system. Requires 1.5 HP minimum
$189

Wagner NB (non bleeder)
Conversion Gun for air only.

 
 

Wagner Fine Spray

Wagner Fine Spray 2400 HVLP (New!)
Regular Price: $189.00padSPECIAL: $159.00

  • 1 qrt metal cup for smaller fine finish applications
  • Large 1.5 qrt cup for larger projects
  • Adjustable pattern size
  • Viscosity cup
  • Large diameter hose and spray gun air passages increase system efficiency for a great finish
  • Air delivery hose is light weight and flexible
  • Hand tight connections simply assembly and clean up. No special tools required.
  • Three position adjustable spray pattern: Horizontal fan, Vertical fan, and Round pattern MORE INFO...

$159

Wagner Fine Spray 2400 HVLP Spray System

Click on the image to enlarge

 
 
Re-enforced 12' quick connect hose.


$45
Secure Payment

 

Re-enforced 24' quick connect hose.


$75
Secure Payment